Accueil > Assistance > Base de connaissances > Battery - DTX CableAnalyzer
If the battery pack
If the battery is completely drained, the power supply will have to be connected for approx. 10 mins before the DTX CableAnalyzer will power up. If it is inserted correctly, then please follow the procedure below: (You will need or later for your DTX)
How often do I need to do this?
You should not have to do this more than once every six months.
Will it prolong the life of the battery?
The DTX Battery Pack Gas Gauge is retrained whenever the gas gauge sees a battery discharged all the way from Full to Empty without any charging between the two conditions. The Full condition is 100 percent charge. A Full charge is usually achieved when the battery is left on the charger overnight. If the unit is on while charging, it is possible for the unit to reach 100 %, and then the charger turns itself off. At that time, the unit will start discharging even though the charge LED is still on. This is OK as long as the pack reached 100% before the charger turned off.
The smart remotes LEDs (lights) show the smart remotes battery status at the end of the power-up cycle.